Owners manual

GETTING TO KNOW YOUR MACHINE

CONTENTS OF PACKAGE

Model 50-122 Sander is shipped complete in one box.

UNPACKING AND CLEAN-UP

1. Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to make sure

that all of the items are accounted for, before discarding any packing material. Place parts on a protected surface

for easy identication and assembly. If any parts are missing or broken, please call RIKON Customer Service (877-

884-5167) as soon as possible for replacements. DO NOT turn your machine ON if any of these items are missing.

You may cause injury to yourself or damage to the machine.

2. Report any shipping damage to your local distributor.

3. Clean all rust protected surfaces with ordinary house hold type grease or spot remover. Do not use; gasoline, paint

thinner, mineral spirits, etc. These may damage painted surfaces.

4. Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean dry cloth.

5. Set packing material and shipping carton aside. Do not discard until the machine has been set up and is running

properly.

A. Motor & Base Assembly

B. Sanding Disc Table Controls

C. Sanding Disc Table

D. Miter Gauge

E. Sandpaper Disc, 8”, PSA

F. Sanding Belt Fence

G. Sanding Belt Tension Release

H. Sanding Belt, 6” x 48”

I. Sanding Belt Tracking Knob

J. Carry Handle

K. Rubber Foot

L. ON/OFF Safety Switch

M. Dust Port 2” O.D.

N. Sanding Belt Frame Support

O. Sanding Belt Cover

P. Sanding Belt Frame Lock Screw

Q. Sanding Disc Table Angle

Support & Arrow Indicator

R. Hex Wrench Tool Holder