Owners manual
2
TABLE OF CONTENTS
SPECIFICATIONS
NOTE: The specications, photographs, drawings and information in this manual represent the current model
when the manual was prepared. Changes and improvements may be made at any time, with no obligation on
the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to
ensure that the information in this manual is correct, to provide you with the guidelines for the proper safety,
assembly and operation of this machine.
Motor .....................................................................................................1 HP, 1 Ph
Motor Speed (no load).......................................................................... 3,450 RPM
Volts ............................................................................................................. 120 V
Amps, Hertz .......................................................................................... 8 A, 60 Hz
Belt Size .................................................................................................... 6” x 48”
Belt Speed (no load) ............................................................................ 1,836 FPM
Disc Size (PSA) Diameter ................................................................................ 10”
Disc Speed (no load) ........................................................................... 2,510 RPM
Sanding Belt Frame Tilt ................................................................................. 0-90°
Belt Fence Size ................................................. 8-3/16” x 2-1/8” or 7-1/4” x 1-3/8”
Belt Fence Tilt .................................................................................................. 90°
Disc Table Size (Length x Width) ..................................................... 13” x 6-11/16”
Disc Table Tilt ................................................................................................ 0-45°
Miter Gauge ‘T’ Slot (Width x Depth) ..................................................... 5/8” x 1/4”
Dust Port (1) .................................................... 2” (50 mm) OD, 1-3/4” (45 mm) ID
Power Cord .................................................................................. 6 Feet, 16 AWG
Overall Size (LxWxH).................. 31-3/16” x 21” x 15-7/16" (792 x 532 x 392 mm)
Base Size (approx.) .......................................... 18-3/8” x 12-1/4” (467 x 311 mm)
Net Weight .................................................................................... 85 lbs (38.5 kg)
Specications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine ..............................................................................................7
Contents of Package .....................................................................................................7 - 8
Assembly .................................................................................................................... 8 - 11
Adjustments...............................................................................................................11 - 15
Operation ..................................................................................................................16 - 18
Maintenance ....................................................................................................................19
Electricals & Wiring Diagram .......................................................................................5 & 19
Troubleshooting .........................................................................................................20 - 21
Accessories ............................................................................................................21
Sander Parts Diagram .......................................................................................................... 22
Sander Parts List ................................................................................................................... 23
Stand Parts Diagram & Parts List ........................................................................................... 24
Stand Assembly ....................................................................................................................... 25
Notes ................................................................................................................ 26
Warranty ..........................................................................................................................27