Technical data

8
TECHNICAL DATA
(Fig. 1)
The owner of the pellet heater is required
to retain the technical documentation and
to present it on demand for inspection by
the authorities or the chimney sweep.
PACKAGING
Your first impression is important to us!
- The packaging of your new domestic
heater offers excellent protection against
damage. Nevertheless, damage can occur to
the heater and the accessories during trans-
portation.
Therefore please check your heater on receipt
to ensure it is complete and free from damage!
Inform your dealer of any shortfalls without
delay!
The wood in the packaging is not surface
treated and can therefore be burnt in your
pellet heater.
The cardboard and sheeting (PE) can be
disposed of at public refuse disposal facilities
for re-cycling.
- The packaging used for your domestic
heater is mainly environmentally neutral.
SPARE PARTS - OVERVIEW
(Fig. 3 - Fig. 7)
DESCRIPTION
01 Fire door
02 Fire door seal
03 Fire door glass
04 Upper temperature limiter
05 Ignition element
06 Conveyorscrew complete
07 Centring plate
08 Motor plate
09 Hexagonal bolt
10 Conveyor screw drive motor
11 Air sensor
20 Internal control unit
21 Main fuse
22 Main board
23 Remote fixed network board (optional)
30 Wing nut
31 Flue gas shaft cleaning lid
32 Intermediate bottom
33 Top/bottom cleaning lid
34 Exhaust gas fan housing
35 Exhaust gas fan motor
36 Hexagonal screws
37 Low temperature switch
38 Smoke tube adapter 100 mm
39 Fire door hinge
40 Container lid (with rating plate, warning sign)
41 Rear wall
42 Side cladding rear right complete
43 Rear wall cover
44 Mains cable with earthed plug
45 Corner post front right complete
46 Front cladding bottom
47 Front cladding top
48 Corner post front left complete
49 Side cladding rear left complete
50 Ceramic lid with insert
TECHNICAL DATA
Height
Width
Depth
Weight without casing
Weight with steel front
Weight with ceramic front
Smoke tube pipe diameter
Heating performance range
Room heating capacity (m
3
)
dependent on house insulation
Fuel consumption
Pellet container capacity
Power supply
Average electrical power consumption
Fuse
1031
530
600
130
137
142
100
2,4 - 8
50 - 220
0,6 - 1,8
32
230; 50
< 100
1,6 T
Exhaust air mass flow
Exhaust air temperature
Chimney draft requirement
6.0 - 6.0
157 - 229
0 - 0
[mm]
[mm]
[mm]
[daN]
[daN]
[daN]
[mm]
[kW]
[m
3
]
[kg/h]
[kg]
[V]; [Hz]
[W]
[A]
[g/s]
[°C]
[Pa]
Subject to technical and optical modifications as well as typographical errors and misprints.
ENGLISH