Technical data

PROBLEM
Fan does not switch off, after fuel feed
has been switched off and the fire cooled
down (approx. 45 min).
CAUSE:
➧ Lower temperature proximity switch is
faulty.
POSSIBLE SOLUTION:
➧ Disconnect fire from power network.
PROBLEM
Fan is not running.
CAUSE:
➧ Fire has no electrical power.
POSSIBLE SOLUTIONS:
➧ Check that the fire plug is plugged in and
switched on. Check that the required
power is available in the wall socket.
➧ Check the fuse on the operating panel.
Caution: Remove the plug!
PROBLEM
Soot or fly ash outside the fire.
CAUSE(S):
➧ Fire door open when the fire is burning.
➧ Leaks in the exhaust gas system or in the
flue gas lines.
POSSIBLE SOLUTIONS:
➧ Always keep fire door closed and if
possible only open when the fire is not
working.
➧ Take care of leaks in the extraction
system (e.g. use heat resistant aluminium
adhesive tape, heat resistant adhesive
sealing tape or heat resistant silicon).
Please note that the controls and wiring
must only be checked when the fire is
unplugged from the electrical supply. Only
trained specialist personnel may carry out
repairs.
23
ENGLISH