Technical data

20
Picture 4
ENGLISH
Picture 5
Clean flue gas channels
Picture 6
CLEANING THE EXHAUST
AIR MANIFOLD
The heating gas manifold is located in the
bottom area of the combustion chamber
(Picture 7 to Picture 10).
➧ After removing the front claddings (see
Page 13)
➧ Opening the combustion chamber door
➧ Remove the bottom inspection opening
(Fig. 5, Part 33) (4 wing nuts)
➧ Clean the interim bottom (Fig. 5, Part 32)
(e.g. using a vacuum cleaner) and then
remove from the combustion chamber.
➧ Now remove the combustion residue
from the collection channel with a
vacuum cleaner.
➧ Fit the parts again in reverse order.
Ensure that seals are tight.
Picture 7
Picture 8
Picture 9