Technical data

34
Note
Please contact your warranty partner for any warranty questions or claims. This is your dealer or installation company. No warranty claims can be accepted
without proper putting into operation, proper operation according to the operating instructions and the supplements in this information sheet.
Protocol for putting into operation for RIKA pellet and combi stoves Date:____________________
Installation address
Name:_________________________________________
Street:_________________________________________
City:___________________________________________
Telephone:______________________________________
Dealer
Name:_________________________________________
Street:_________________________________________
City:___________________________________________
Telephone:______________________________________
Stove data
Stove type: Casing undamaged
Serial number: Operating instructions
Software version: Warranty documents
Touchdisplay version: Door opener
Electrical periphery
Connection socket earthed GSM modem present
Room thermostat present Function checked
Check of system components
Combustion chamber door seal checked Ease of movement burnback flap checked (combi)
Ease of movement flue gas flap checked (combi)
Exhaust line / chimney
Diameter Connection leakproof
Bends Chimney draught
Stove functions
Pellet container filled Grid turns (360°) und keeps in heating position
Tested pellet quality according to Önorm/DIN plus/
ENplus-A1
Ignition element glows
Electrical connections made Screw motors run
Safety flaps tightened (combi) Do pellets fall into the combustion chamber?
Induced draught blower runs Ignition performed
Stove was switched off when handed over
Operator instruction
Stove function Warranty terms
Control Cleaning
Operating instructions Cleaning or maintenance interval
work performed correctly according to order placed
_______________________ _____________________ _______________________
Technican: Operator Client
Company:_______________________________________