Instruction manual

17
d) Flashing Printer Lights
If both lights are flashing on the top of your printer it will generally indicate that
your printer waste pad is full. Canon printers are programmed to perform a
maximum number of prints prior to requiring a service which normally involves
returning your printer to a Canon dealer to perform a reset. To override this
issue please perform the following steps
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the
Power button once more.
8. If this does not resolve the problem please contact us immediately.
*Please note that this procedure should be performed no more than 3 times.
6)
Warranty
Please note that your CISS has a manufactures warranty of 3 months from
date of purchase. Your warranty will be void if the system is incorrectly
handled. This warranty does not cover printer hardware. Please ensure to
retain your purchase receipt along with a copy of your nozzle check to assist
with processing your claim.
7)
Warning
• Keep out of reach of children
• Do not drink ink
• Avoid ink contact with eyes
• Store between 15-35°C
• Do not store in direct sunlight
• Once your CISS is installed NEVER raise
it above your printer.
* Please note that our inks are completely compatible with your Canon printer but are
not manufactured by Canon. All brand names, trademarks and photos are property of
their respective holders and are used for reference only.