Instruction manual

12
e) Release the tube clamp on the front of the CISS by rolling it up.
f) Reinsert power cable to the rear of your printer and perform a head clean and
nozzle check as per steps 1)1)a) and 1)b) on page 4. Please note that this may
need to be performed several times to ensure excess air is removed from the
lines.
g) Congratulations you have now successfully installed your new RIHAC
Continuous Ink Supply.
Caution
DO NOT HAVE THE INK RESERVOIRS HIGHER OR LOWER THAN THE
PRINTER HEIGHT. THIS WILL EFFECT THE INK FLOW TO YOUR
PRINTER, AND MAY CAUSE YOUR PRINTER TO FLOOD WITH INK
Release the tube
clamp by rolling
the roller up.