Instruction manual

9
d) Examine the rear of the chip to ensure the LED has not been damaged or cut
off.
undamaged cartridge chip damaged cartridge chip
e) Place the chip onto the corresponding coloured CISS cartridge, ensuring that
the small plastic lugs are inserting into the chip holes. Use a soldering iron
gently
melt the plastic lugs to hold the chip in place.
f) Repeat these steps for all the cartridges on your CISS
g) Alternatively you can fit the cartridge chips using thin double sided tape
although the preferred method is with a soldering iron.
If attaching the chip with double sided tape, please cut the tape and attach it to
the rear of the chip as pictured below. DO NOT COVER ATTACHMENT
HOLES OR LED.
rear of cartridge chip pictured
LED
LED
Attachment holes
Thin double sided
tape
Missing
LED