Instruction manual

20
10) Tube set up (MX850 Series Only)
a) Included in your accessories package you will find two large ‘S’ clips. Please
contact
rihac® if your accessories package does not contain theses items.
b) Remove the plastic clip located on the end of the metal tube arm. The clip will
remove by simply twisting it clockwise.
h) Attach the metal tube arm as pictured below. Ensure the tubing is not twisted
between the arm and the cartridges.
i) Remove the backing to the double sided tape and secure the tube exit clip as
pictured below. Ensure the tubing is not twisted between the arm and the
cartridges.
Remove Plastic Clip