Instruction manual

14
e) Tubing clip positioning
IP4300 Only
Peel off the backing tape to the tube connection and place it as pictured below.
Once again please ensure not to twist or bend the tubing.
IP5300 Only
Peel off the backing tape to the tube connection and place it as pictured below.
Once again please ensure not to twist or bend the tubing.
f) Use the spare travel plug or filler plug on the printer lid sensor button. This will
keep the switch permanently activated as your printer lid will no longer close
enough to activate the switch.
Please continue from section 11) Finishing Touches on page 22 to complete
the installation process.
Printer lid
sensor
button
Printer lid
sensor
button