Instruction manual

e) Carefully place each silicone nozzle seal into position around each of the

printer heads as shown. Do not remove the original black rubber grommets.

6) Inserting the cartridges

a) Reinsert the print head (with silicone seals now fitted) into the printer

b) Remove the cartridge cover from each of your new cartridges. This is done by

slowly moving the clip in an anticlockwise direction. Beware that during transit

ink may build up in this cap and will release when the cover is removed, so

have a tissue or similar handy to absorb the excess ink.

c) Insert the new cartridges into your printer as a group. Please ensure that the

cartridges are placed in the correct coloured cartridge holder. Once in place

gently push down on the cartridges to click them into place

Incorrectly placed silicone seals

can cause poor printing quality.

Please ensure that the silicone

seals do not move from position

when inserting the cartridges.

These seals must not cover

the silver printer head.