Instruction manual

11
THE FOLLOWING STEPS ARE VERY IMPORTANT FOR ALL CANON PRINTERS.
5) Inserting the silicone nozzle seals.
a) Turn on your printer and open the cover. The cartridge holder will move to the
cartridge change position. Remove power cable from the back of your printer.
Remove the cartridges from the printer.
b) Remove the printer head from your printer by lifting the print head lock arm.
The print head will then lift out
c) Remove the 5 silicone seals from your kit. During manufacture 2 seals may
stick together giving the appearance of a single seal.
d) Ensure each seal is clean by placing each seal onto a small piece of double
sided tape provided to remove dust and dirt. Please ensure both sides of the
seal are cleaned. Use the tweezers provided to remove each seal from the
tape ensuring no dust, dirt or oils are passed onto it from your hands.