Data Sheet

RIGOL
4
Amplitude
Measurement Range
Range
f
c
≥ 10 MHz
DANL to +30 dBm
Maximum Safe Input Level
[1]
DC Voltage 50 V
CW RF Power
+30 dBm, attenuation ≥ 40 dB, preamp off.
-10 dBm, attenuation = 20 dB, preamp on.
Maximum Damage Level
CW RF Power +33 dBm (2 W)
Note: [1] When f
c
< 10 MHz, the maximum safe input level is decreased.
Displayed Average Noise Level (DANL)
RSA5032 RSA5032-TG RSA5065 RSA5065-TG
attenuation = 0 dB, sample detector, trace averages ≥ 50, tracking generator off,
normalized to 1 Hz, 20
℃
to 30
℃
, input impedance = 50 Ω.
Preamp off
9 kHz to 100 kHz <-120 dBm (typical) <-120 dBm (typical)
100 kHz to 20 MHz <-135 dBm, <-140 dBm (typical) <-135 dBm, <-140 dBm (typical)
20 MHz to 1.5 GHz <-142 dBm, <-145 dBm (typical) <-142 dBm, <-145 dBm (typical)
1.5 GHz to 2.7 GHz <-140 dBm, <-143 dBm (typical) <-140 dBm, <-143 dBm (typical)
2.7 GHz to 3.2 GHz <-138 dBm, <-141 dBm (typical) <-138 dBm, <-141 dBm (typical)
3.2 GHz to 5.5 GHz <-138 dBm, <-143 dBm (typical)
5.5 GHz to 6.5 GHz <-136 dBm, <-141 dBm (typical)
Preamp on
100 kHz to 20 MHz <-152 dBm, <-160 dBm (typical) <-152 dBm, <-160 dBm (typical)
20 MHz to 1.5 GHz <-162 dBm, <-165 dBm (typical) <-162 dBm, <-165 dBm (typical)
1.5 GHz to 2.7 GHz <-160 dBm, <-163 dBm (typical) <-160 dBm, <-163 dBm (typical)
2.7 GHz to 3.2 GHz <-158 dBm, <-161 dBm (typical) <-158 dBm, <-161 dBm (typical)
3.2 GHz to 5.5 GHz <-156 dBm, <-161 dBm (typical)
5.5 GHz to 6.5 GHz <-154 dBm, <-159 dBm (typical)
Measured frequency VS maximum input power
of RSA5032/RSA5032-TG/RSA5065/RSA5065-TG
Measured frequency VS maximum input power
of RSA5032/RSA5032-TG/RSA5065/RSA5065-TG