Instructions

RIGOL
RSA5000 Quick Guide 23
English
Remote Control
RSA5000 can be connected to the PC via the USB or LAN interface to set up
communication and realize remote control through the PC. The remote control
can be realized by using SCPI (Standard Commands for Programmable
Instruments) commands. The RSA5000 series spectrum analyzer supports two
ways of remote control: user-defined programming and PC software (e.g.
RIGOL Ultra Sigma).
When the instrument is in remote control, the keys (except the Power key
and Esc) on the front panel are locked. At this time, you can press Esc
to exit the remote mode.
More Product Information
Obtain the device information
Press System  System Info to view the device information and the
installation status of all the options.
For more information about this instrument, refer to the relevant manuals by
logging in to the official website of RIGOL (www.rigol.com) to download them.
RSA5000 User's Guide : introduces the functions of the instrument and the
operation methods, remote control methods, possible failures and solutions in
using the instrument, the technical specifications, and order information.
RSA5000 Programming Guide : provides detailed descriptions of SCPI
commands and programming instances of the instrument.
RSA5000 Datasheet : provides the main features and technical specifications of
the instrument.