Instructions

Chapter 2 Functions of the Front Panel of GPSA RIGOL

RSA3000E User Guide 2-35

3. Reference Position

After the normalize function is enabled, you can adjust the vertical position of

Reference Level on the screen by adjusting the reference position.

 The function of this menu is similar to that of Reference Level. When it is set

to 0%, Reference Level is displayed at the bottom of the graticule and at

the top line of the graticule when it is set to 100%.

 You can use the numeric keys, the knob, and the arrow keys on the front

panel to modify this parameter; also you can modify it on the touchscreen.

For details, refer to descriptions in "Parameter Setting".

Table 2-29 Tracking Generator Reference Position

Parameter

Remarks

Default

100%

Range

0% to 100%

Unit

Knob Step

Left/Right Arrow Key Step

Up/Down Arrow Key Step

10%

4. Reference Trace

Sets whether to display the reference trace. If you set "Reference Trace" to be

"On", the reference trace saved (Trace 6) will be shown.

5. Save Ref Trace

Saves the data of Trace1 to Trace6 as the reference value for normalization. This

operation should be done before you enable the normalize function.