Instructions

RIGOL Chapter 5 Functions of the Front Panel of VSA
5-50 RSA3000E User Guide
analyzer will perform one self-calibration after being started.
Interface
The analyzer supports the LAN or USB communication interface.
1. LAN
Sets the LAN parameters. Use the touch screen or the externally connected
mouse to tap or click the setting information icon
at the top of the user
interface. Then tap or click the network setting information icon
. The LAN
parameter setting interface is displayed, as shown in the following figure.
Figure 5-9 LAN Parameter Setting
The following items can be set through the front panel keys, shortcut keys on
the keyboard, externally connected mouse, touch screen, or remote interface.
1) Mode
Sets the mode of obtaining the IP address.
 DHCP: When DHCP is selected, the DHCP server assigns network
parameters (such as the IP address, subnet mask, and gateway) to the
analyzer based on the current network configuration.
 Auto: When "Auto" is selected, the instrument will acquire the IP
address ranging from "169.254.0.1" to "169.254.255.254" and the
subnet mask (255.255.0.0) automatically based on the current
network configuration.
 Manual: When "Manual" is selected, you can self-define a desired IP
address for the analyzer.