Instructions

RIGOL Chapter 2 Functions of the Front Panel of GPSA
2-92 RSA3000E User Guide
Preset
Recalls the preset setting and restores the system settings of the analyzer to a
specified status.
Remarks:
 To set the preset type, press System  Preset  Preset Type to select
"Default" or any one of the items from "User1" to "User6".
 Press Preset to recall the specified factory settings (as shown in the following
table, except the items specified in Note[3]) or user settings.
Parameter Name
GPSA Parameter Value
FREQ
Center Freq
1.5 GHz
Start Freq
0 Hz
Stop Freq
3 GHz
CF Step
Auto, 300 MHz
Freq Offset
0 Hz
Signal Track
Off
SPAN
Span
3 GHz
AMPT
Ref Level
0 dBm
Attenuation
Auto, 10 dB
RF Preamp
Off
Y Axis Unit
dBm
Scale Type
Log
Scale/Div
10 dB
Max Mixer Lvl
-10 dBm
Ref Offset
0 dB
BW
RBW
Auto, 3 MHz
SPAN/RBW Ratio
Auto, 106
VBW
Auto, 3 MHz
VBW/RBW Ratio
Auto, 1
Filter Type
Gaussian
Sweep
Sweep Points
801
Sweep Time
Auto, 1 ms
Sweep Time Mode
Continuous
Sweep Time Rule
Normal
Trigger
Trigger Source
Free Run
Trigger Hold-off
Off, 100 ms