Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-57
:DISPlay:VIEW:DENSity:PERSistence:INFinite
Syntax
:DISPlay:VIEW:DENSity:PERSistence:INFinite OFF|ON|0|1
:DISPlay:VIEW:DENSity:PERSistence:INFinite?
Description
Enables or disables the infinite mode of the persistence time.
Queries the status of the infinite mode of the persistence time.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Remarks
This command is only available for Density and Density Spectrogram in RTSA mode.
Return Format
The query returns 0 or 1.
Example
The following command enables the infinite mode of the persistence time.
:DISPlay:VIEW:DENSity:PERSistence:INFinite ON or :DISPlay:VIEW:DENSity:PERSistence:INFinite 1
The following query returns 1.
:DISPlay:VIEW:DENSity:PERSistence:INFinite?
:DISPlay:VIEW[:SELect]
Syntax
:DISPlay:VIEW[:SELect] NORMal|SPECtrogram|DENSity|DSPectrogram|PVT|PVTSpectrum|PSPectrogram
:DISPlay:VIEW[:SELect]?
Description
Sets the current display view.
Queries the current display view.
Parameter
Name
Type
Range
Default
—— Keyword
NORMal|SPECtrogram|DENSity|DSPectrogram|PVT|
PVTSpectrum|PSPectrogram
NORMal
Remarks
NORMal: indicates the normal view.
SPECtrogram: indicates Spectrogram.
DENSity: indicates Density.
DSPectrogram: indicates Density and Density Spectrogram.
PVT: indicates Power versus Time spectrum.
PVTSpectrum: indicates PvT Spectrum.
PSPectrogram: indicates PvT Spectrogram.
This command is only available for RTSA mode.
Return Format
The query returns NORM, SPEC, DENS, DSP, PVT, PVTS, or PSP.