Manualshelf

Instructions

ManualsBrandsRigol ManualsLaboratory EquipmentRigol RSA3030E Spectrum analyzer Manufacturer's standards (no certificate) 3 GHz
71727374757677787980
Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-45
:CONFigure:PSGRam
Syntax
:CONFigure:PSGRam
Description
Sets the analyzer to be in the PvT Spectrogram measurement state.
Remarks
This command is only available for RTSA mode.
Running this command will discontinue the current measurement and restore the specified measurement of
the instrument to the default factory state.
:CONFigure:PSPectrum
Syntax
:CONFigure:PSPectrum
Description
Sets the analyzer to be in the PvT Spectrum measurement state.
Remarks
This command is only available for RTSA mode.
Running this command will discontinue the current measurement and restore the specified measurement of
the instrument to the default factory state.
:CONFigure:PVT
Syntax
:CONFigure:PVT
Description
Sets the analyzer to be in the PvT measurement state.
Remarks
This command is only available for RTSA mode.
Running this command will discontinue the current measurement and restore the specified measurement of
the instrument to the default factory state.
:CONFigure:SANalyzer
Syntax
:CONFigure:SANalyzer
Description
This command is only available for GPSA mode.
This command will disable the currently activated measurement function, and set the analyzer to the swept
SA mode.