Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-39
:CALCulate:MATH TRACE1,PDIFference,TRACE4,TRACE5,,
The following query returns PDIFference.
:CALCulate:MATH? TRACE1
:CALCulate:NTData[:STATe]
Syntax
:CALCulate:NTData[:STATe] OFF|ON|0|1
:CALCulate:NTData[:STATe]?
Description
Enables or disables the normalize function.
Queries the status of normalization.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Remarks
This command is only available for RSA3030E-TG/RSA3015E-TG working in GPSA mode.
This command is only valid when the tracking generator function is enabled.
Return Format
The query returns 0 or 1.
Example
The following command enables normalization.
:CALCulate:NTData:STATe ON or :CALCulate:NTData:STATe 1
The following query returns 1.
:CALCulate:NTData:STATe?