Instructions

ManualsBrandsRigol ManualsLaboratory EquipmentRigol RSA3030E Spectrum analyzer Manufacturer's standards (no certificate) 3 GHz

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL

RSA3000E Programming Guide 2-35

:CALCulate:MARKer<n>:X

Syntax

:CALCulate:MARKer<n>:X <param>

:CALCulate:MARKer<n>:X?

Description

Sets the X-axis value of the specified marker. Its default unit is Hz.

Queries the X-axis value of the specified marker.

Parameter

Name

Type

Range

Default

<n>

Discrete

1|2|3|4|5|6|7|8

——

<param>

Consecutive Real Number

Refer to "Remarks"

——

Remarks

If the readout mode is frequency, it cannot exceed the frequency range of the sweep and the units available

are Hz (default), kHz, MHz, and GHz.

If the readout mode is time, it cannot exceed the time range of the sweep and the units available are s

(default), μs, ms, and ks.

<param> can be any value within the available range of the current X axis.

If the marker mode of the specified marker is Position or Fixed, this command sets the X value of the

marker.

If the specified marker mode is Delta, this command sets the X value of the delta marker relative to the

reference marker.

The PvT only supports setting the marker on Trace 1.

Return Format

The query returns the X-axis value of the marker in scientific notation.

Example

The following command sets the X-axis value of Marker 1 to 150 MHz (the readout mode is frequency).

:CALCulate:MARKer1:X 150000000

The following query returns 1.500000000e+08.

:CALCulate:MARKer1:X?

:CALCulate:MARKer<n>:X:READout

Syntax

:CALCulate:MARKer<n>:X:READout FREQuency|TIME|ITIMe|PERiod

:CALCulate:MARKer<n>:X:READout?