Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-26 RSA3000E Programming Guide
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one left peak search, and marks with Marker 2.
:CALCulate:MARKer2:MAXimum:LEFT
:CALCulate:MARKer<n>:MAXimum[:MAX]
Syntax
:CALCulate:MARKer<n>:MAXimum[:MAX]
Description
Performs one peak search based on the search mode set by the :CALCulate:MARKer:PEAK:SEARch:MODE
command and marks it with the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one peak search, and marks with Marker 2.
:CALCulate:MARKer2:MAXimum:MAX
:CALCulate:MARKer<n>:MAXimum:NEXT
Syntax
:CALCulate:MARKer<n>:MAXimum:NEXT
Description
Searches for and marks the peak whose amplitude on the trace is next to that of the current peak and
which meets the peak search condition.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one next peak search, and marks with Marker 2.
:CALCulate:MARKer2:MAXimum:NEXT