Instructions

Chapter 4 Command System for VSA Mode RIGOL
RSA3000E Programming Guide 4-69
Remarks
If the specified file already exists, overwrite it.
When <n> is set to 1, edit the upper mask; when set to 2, edit the lower mask.
Example
The following command saves the upper mask FMT file with the filename (mask1.csv) to the "/vsa/mask"
folder.
:TRIGger:SEQuence:FMT:MASK1:NAME mask1
The following query returns mask1.
:TRIGger:SEQuence:FMT:MASK1:NAME?
:TRIGger[:SEQuence]:FMT:MASK<n>:NEW
Syntax
:TRIGger[:SEQuence]:FMT:MASK<n>:NEW
Description
Clears the currently activated mask and creates a default new mask.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2
——
Remarks
When <n> is set to 1, it indicates that the upper mask is being edited; when it is set to 2, it indicates that
the lower mask is being edited.
This command is only valid when you select FMT to be the trigger source.
:TRIGger[:SEQuence]:HOLDoff
Syntax
:TRIGger[:SEQuence]:HOLDoff <time>
:TRIGger[:SEQuence]:HOLDoff?
Description
Sets the trigger holdoff time.
Queries the trigger holdoff time.
Parameter
Name
Type
Range
Default
<time>
Consecutive Real Number
100 μs to 500 ms
100 ms
Remarks
This command is only valid when the trigger holdoff function is enabled.
Return Format
The query returns the trigger holdoff time in scientific notation. The unit is s.
Example
The following command sets the sync holdoff time to 100 ms.
:TRIGger:SEQuence:HOLDoff 0.1