Instructions

Chapter 4 Command System for VSA Mode RIGOL
RSA3000E Programming Guide 4-1
Chapter 4 Command System for VSA Mode
This chapter introduces the commands of the RSA5000E series spectrum analyzer in VSA mode.
Contents in this chapter:
 :CALCulate Commands
 :CALibration Commands
 :CONFigure Commands
 :DISPlay Commands
 :FETCh Commands
 :FORMat Commands
 IEEE 488.2 Common Commands
 :INITiate Command
 :INSTrument Commands
 :MMEMory Commands
 [:SENSe] Commands
 :STATus Commands
 :SYSTem Commands
 :TRACe Command
 :TRIGger Commands
Remarks:
1. For the command set, unless otherwise specified, the query command returns "N/A" (without
quotations in its return format) if no specified option is installed. If the queried function is disabled or
improper type match is found, the query command will return "Error" (without quotations in its return
format).
2. This manual takes RSA3030E as an example to illustrate the range of the parameters in each
command.