Instructions

RIGOL Chapter 3 Command System for EMI Mode
3-94 RSA3000E Programming Guide
:TRIGger Commands
Command List:
 :TRIGger[:SEQuence]:ATRigger
 :TRIGger[:SEQuence]:ATRigger:STATe
 :TRIGger[:SEQuence]:EXTernal<n>:DELay
 :TRIGger[:SEQuence]:EXTernal<n>:DELay:STATe
 :TRIGger[:SEQuence]:EXTernal<n>:SLOPe
 :TRIGger[:SEQuence]:HOLDoff
 :TRIGger[:SEQuence]:HOLDoff:STATe
 :TRIGger[:SEQuence]:SOURce
 :TRIGger2:MODE
:TRIGger[:SEQuence]:ATRigger
Syntax
:TRIGger[:SEQuence]:ATRigger <time>
:TRIGger[:SEQuence]:ATRigger?
Description
Sets the time that the analyzer will wait for the trigger to be initiated automatically.
Queries the time that the analyzer will wait for the trigger to be initiated automatically.
Parameter
Name
Type
Range
Default
<time>
Consecutive Real Number
1 ms to 100 s
100 ms
Remarks
This command is only valid when the auto triggering function is enabled.
Return Format
The query returns the time value in scientific notation. The unit is s.
Example
The following command sets the time to 10 ms.
:TRIGger:SEQuence:ATRigger 0.01
The following query returns 1.000000000e-02.
:TRIGger:SEQuence:ATRigger?