Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-85
[:SENSe]:FSCan:SEQuence:REMeasure
Syntax
[:SENSe]:FSCan:SEQuence:REMeasure CURRent|MARKed|ALL
[:SENSe]:FSCan:SEQuence:REMeasure?
Description
Sets the type of the final measurement.
Queries the type of the final measurement.
Parameter
Name
Type
Range
Default
--
Keyword
CURRent|MARKed|ALL
CURRent
Remarks
CURRent: indicates the selected signal.
MARKed: indicates the marked signal.
ALL: indicates all the signals.
Return Format
The query returns CURR, MARK, or ALL.
Example
The following command sets the type of the final measurement to CURRent.
:SENSe:FSCan:SEQuence:REMeasure CURRent
The following query returns CURR.
:SENSe:FSCan:SEQuence:REMeasure?
[:SENSe]:FSCan:SLISt:COUPle:METer
Syntax
[:SENSe]:FSCan:SLISt:COUPle:METer OFF|ON|0|1
[:SENSe]:FSCan:SLISt:COUPle:METer?
Description
Enables or disables the coupling function between the meter and the signal table.
Queries the status of the coupling function between the meter and the signal table.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Return Format
The query returns 0 or 1.
Example
The following command enables the coupling function between the meter and the signal table.
:SENSe:FSCan:SLISt:COUPle:METer ON or :SENSe:FSCan:SLISt:COUPle:METer 1
The following query returns 1.
:SENSe:FSCan:SLISt:COUPle:METer?