Instructions

RIGOL Chapter 3 Command System for EMI Mode
3-52 RSA3000E Programming Guide
:MMEMory:DELete
Syntax
:MMEMory:DELete <file_name>
Description
Deletes a specified file.
Parameter
Name
Type
Range
Default
<file_name>
ASCII String
--
--
Remarks
<file_name> should contain the path and the filename.
This operation fails if the file with the specified filename does not exist.
Example
The following command deletes the "state1.sta" file in the "/emi/state" folder.
:MMEMory:DELete /emi/state/state1.sta
:MMEMory:LOAD:CORRection
Syntax
:MMEMory:LOAD:CORRection 1|2|3|4,<file_name>
Description
Loads the data from the specified file (suffixed with .csv) to carry out amplitude correction.
Parameter
Name
Type
Range
Default
--
Discrete
1|2|3|4
--
<file_name>
ASCII String
--
--
Remarks
The parameter 1|2|3|4 corresponds to ANTenna|CABLe|OTHer|USER.
This operation fails if the file with the specified filename does not exist.
Example
The following command loads the amplitude correction file ANT.csv to the instrument.
:MMEMory:LOAD:CORRection 1,ANT.csv
:MMEMory:LOAD:LIMit
Syntax
:MMEMory:LOAD:LIMit <label>,<file_name>
Description
Loads the edited limit line file (.csv).