Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-27
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
--
Bool
OFF|ON|0|1
OFF|0
Remarks
If the specified marker is disabled currently, by default, the marker mode is "Position" when you send the
command to enable the marke.
Return Format
The query returns 0 or 1.
Example
The following command enables Marker 1.
:CALCulate:MARKer1:STATe ON or :CALCulate:MARKer1:STATe 1
The following query returns 1.
:CALCulate:MARKer1:STATe?
:CALCulate:MARKer<n>:X
Syntax
:CALCulate:MARKer<n>:X <param>
:CALCulate:MARKer<n>:X?
Description
Sets the frequency of the specified marker.
Queries the frequency of the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
<param>
Consecutive Real Number
30 MHz to 1 GHz
515 MHz
Return Format
The query returns the frequency of the specified marker in scientific notation.
Example
The following command sets the frequency of Marker 1 to 515 MHz.
:CALCulate:MARKer1:X 515000000
The following query returns 5.150000000e+08.
:CALCulate:MARKer1:X?
:CALCulate:MARKer<n>:Y?
Syntax
:CALCulate:MARKer<n>:Y?
Description
Queries the amplitude of the specified marker.