Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-25
Example
The following command sets the amplitude offset of Limit Line 2 to 20 dB.
:CALCulate:LLINe2:OFFSet:Y 20
The following query returns 2.000000000e+01.
:CALCulate:LLINe2:OFFSet:Y?
:CALCulate:LLINe<n>:TRACe
Syntax
:CALCulate:LLINe<n>:TRACe 1|2|3
:CALCulate:LLINe<n>:TRACe?
Description
Sets the trace for the current limit line test.
Queries the trace for the current limit line test.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6
--
--
Discrete
1|2|3
Refer to "Remarks"
Remarks
Limit Line 1 and 2: The default is Trace 1.
Limit Line 3 and 4: The default is Trace 2.
Limit Line 5 and 6: The default is Trace 3.
Return Format
The query returns 1, 2, or 3.
Example
The following command sets that Trace 2 is tested against Limit Line 3.
:CALCulate:LLINe3:TRACe 2
The following query returns 2.
:CALCulate:LLINe3:TRACe?
:CALCulate:MARker:PEAK:SEARch:THReshold:LINe
Syntax
:CALCulate:MARker:PEAK:SEARch:THReshold:LINe OFF|ON|0|1
:CALCulate:MARker:PEAK:SEARch:THReshold:LINe?
Description
Enables or disables the peak threshold line.
Queries the status of the peak threshold line.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0