Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-9
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one left peak search, and marks with Marker 2.
:CALCulate:FSCan:MARKer2:MAXimum:LEFT
:CALCulate:FSCan:MARKer<n>:MAXimum:NEXT
Syntax
:CALCulate:FSCan:MARKer<n>:MAXimum:NEXT
Description
Searches for and marks the peak whose amplitude on the trace is next to that of the current peak and
which meets the peak search condition.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one next peak search, and marks with Marker 2.
:CALCulate:FSCan:MARKer2:MAXimum:NEXT
:CALCulate:FSCan:MARKer<n>:MAXimum:RIGHt
Syntax
:CALCulate:FSCan:MARKer<n>:MAXimum:RIGHt
Description
Searches for and marks the nearest peak which is located at the right side of the current peak and meets
the peak search condition.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one right peak search, and marks with Marker 2.
:CALCulate:FSCan:MARKer2:MAXimum:RIGHt