Instructions

RIGOL Chapter 3 Command System for EMI Mode
3-4 RSA3000E Programming Guide
:CALCulate:EMI:SLISt:DELete
Syntax
:CALCulate:EMI:SLISt:DELete ALL|CURRent|MARKed|UNMarked
Description
Sets the signal type to be deleted.
Parameter
Name
Type
Range
Default
--
Discrete
ALL|CURRent|MARKed|UNMarked
CURRent
Remarks
ALL: deletes all the signals in the signal table.
CURRent: deletes the currently selected signal from the signal table.
MARKed: deletes all the marked signals from the signal table.
UNMarked: deletes all the unmarked signals from the signal table.
Example
The following command deletes all the signals in the signal table.
:CALCulate:EMI:SLISt:DELete ALL
:CALCulate:FSCan:MAMarker[:SET]:SLISt
Syntax
:CALCulate:FSCan:MAMarker[:SET]:SLISt
Description
Adds the current measurement results to the signal table.
:CALCulate:FSCan:MARKer:AOFF
Syntax
:CALCulate:FSCan:MARKer:AOFF
Description
Turns off all the enabled markers.
:CALCulate:FSCan:MARKer:COUPle[:STATe]
Syntax
:CALCulate:FSCan:MARKer:COUPle[:STATe] OFF|ON|0|1
:CALCulate:FSCan:MARKer:COUPle[:STATe]?
Description
Enables or disables the couple marker function.
Queries the state of the couple marker function.