Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-1
Chapter 3 Command System for EMI Mode
This chapter introduces the commands of the RSA series spectrum analyzer in EMI mode.
Contents in this chapter:
 :CALCulate Commands
 :CALibration Commands
 :COUPle Command
 :CONFigure Command
 :DISPlay Commands
 :FETCh Command
 :FORMat Commands
 IEEE 488.2 Common Commands
 :INITiate Commands
 :INSTrument Commands
 :MMEMory Commands
 [:SENSe] Commands
 :STATus Commands
 :SYSTem Commands
 :TRACe Commands
 :TRIGger Commands
 :UNIT Command
Remarks:
1. For the command set, unless otherwise specified, the query command returns "N/A" (without
quotations in its return format) if no specified option is installed. If the queried function is disabled or
improper type match is found, the query command will return "error" (without quotations in its return
format).
2. This manual takes RSA3030E as an example to illustrate the range of the parameters in each
command.