Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-208 RSA3000E Programming Guide
:TRIGger[:SEQuence]:EXTernal<n>:DELay
Syntax
:TRIGger[:SEQuence]:EXTernal<n>:DELay <time>
:TRIGger[:SEQuence]:EXTernal<n>:DELay?
Description
Sets the delay time for the external trigger.
Queries the delay time for the external trigger.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2
——
<time>
Consecutive Real Number
0 μs to 500 ms
1 μs
Remarks
When the parameter n is set to 1, it indicates External Trigger 1; when set to 2, it indicates External Trigger
2.
This command is only valid when the external trigger delay function is enabled.
Return Format
The query returns the delay time for the external trigger in scientific notation. The unit is s.
Example
The following command sets the delay time for External Trigger 1 to 100 ms.
:TRIGger:SEQuence:EXTernal1:DELay 0.1
The following query returns 1.000000000e-01.
:TRIGger:SEQuence:EXTernal1:DELay?
:TRIGger[:SEQuence]:EXTernal<n>:DELay:STATe
Syntax
:TRIGger[:SEQuence]:EXTernal<n>:DELay:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:EXTernal<n>:DELay:STATe?
Description
Enables or disables the external trigger delay function.
Queries the status of the external trigger delay function.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2
——
——
Bool
OFF|ON|0|1
OFF|0
Remarks
When the parameter n is set to 1, it indicates External Trigger 1; when set to 2, it indicates External Trigger
2.
Return Format
The query returns 1 or 0.
Example
The following command enables the delay function of External Trigger 1.