Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-196 RSA3000E Programming Guide
:SYSTem:PRESet:USER:SAVE
Syntax
:SYSTem:PRESet:USER:SAVE
Description
Saves the current user setting.
Remarks
If the current preset type is "FACTory", save the current user setting to User1. If the current preset type is
"User1 through User6", save the current user setting to the specified user.
:SYSTem:SCPI:DISPlay
Syntax
:SYSTem:SCPI:DISPlay OFF|ON|0|1
:SYSTem:SCPI:DISPlay?
Description
Enables or disables the SCPI display.
Queries the status for the SCPI display.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Remarks
When you use the SCPI commands to control the instrument remotely, turning on the SCPI display will go to
the specified menu of the corresponding command; turning off the SCPI Display will not go to the specified
menu.
Return Format
The query returns 0 or 1.
Example
The following command enables the SCPI display.
:SYSTem:SCPI:DISPlay 1 or :SYSTem:SCPI:DISPlay ON
The following query returns 1.
:SYSTem:SCPI:DISPlay?
:SYSTem:SECurity:CLEar
Syntax
:SYSTem:SECurity:CLEar
Description
Clears all the data that you set safely.
Remarks
Deletes all the files that you have saved, deletes all the configuration files, and executes the factory
resetting operation.