Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-191
:SYSTem:COMMunicate:LAN[:SELF]:MDNS:STATe
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:MDNS:STATe OFF|ON|0|1
:SYSTem:COMMunicate:LAN[:SELF]:MDNS:STATe?
Description
Enables or disables the state of the network information sending.
Queries the on/off status of the network information sending.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Remarks
ON|1: The state of the network information sending is turned on.
ON|0: The state of the network information sending is turned off.
Return Format
The query returns 0 or 1.
Example
The following command sets the state of the network information sending to "on".
:SYSTem:COMMunicate:LAN:SELF:MDNS:STATe ON or :SYSTem:COMMunicate:LAN:SELF:MDNS:STATe 1
The following query returns 1.
:SYSTem:COMMunicate:LAN:SELF:MDNS:STATe?
:SYSTem:COMMunicate:LAN[:SELF]:RESet
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:RESet
Description
Resets the LAN setting: enable the DHCP, disable Auto IP and the Manual IP.
:SYSTem:CONFigure:INFormation?
Syntax
:SYSTem:CONFigure:INFormation?
Description
Queries the system information of the spectrum analyzer.
Remarks
The system information includes the model, serial number, software and hardware version number, and
firmware version number.
Return Format
The query returns the system information. For example,
Model:RSA3030E
SN:RSA3A200100001