Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-167
Return Format
The query returns PASS or FAIL.
Example
The following query returns PASS.
:SENSe:SIGCapture:2FSK:PF?
[:SENSe]:SIGCapture:2FSK:PFSWitch[:STATe]
Syntax
[:SENSe]:SIGCapture:2FSK:PFSWitch[:STATe] OFF|ON|0|1
[:SENSe]:SIGCapture:2FSK:PFSWitch[:STATe]?
Description
Enables or disables the Pass/Fail function.
Queries the on/off status of the Pass/Fail function.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Remarks
This command is only available for RTSA mode and valid when the SSC function is enabled.
Return Format
The query returns 0 or 1.
Example
The following command enables the the Pass/Fail function.
:SENSe:SIGCapture:2FSK:PFSWitch:STATe ON or :SENSe:SIGCapture:2FSK:PFSWitch:STATe 1
The following query returns 1.
:SENSe:SIGCapture:2FSK:PFSWitch:STATe?
[:SENSe]:SIGCapture:2FSK:RESet
Syntax
[:SENSe]:SIGCapture:2FSK:RESet
Description
Performs the reset operation, deletes the original signal, and restarts to capture the signal.
Remarks
This command is only available for RTSA mode and valid when the SSC function is enabled.