Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-131
[:SENSe]:CORRection:CSET<n>:DATA:MERGe
Syntax
[:SENSe]:CORRection:CSET<n>:DATA:MERGe <x>,<ampl>,{<x>,<ampl>}
Description
Adds correction data to the current correction curve.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4
--
<x>
Consecutive Real Number
0 Hz to 3 GHz
--
<ampl>
Consecutive Real Number
-120 dBm to +100 dBm
--
Remarks
This command is only available for GPSA mode.
<n>: 1 indicates antenna; 2 indicates cable; 3 indicates other, and 4 indicates user.
The range for the number of editing points is from 1 to 200.
Return Format
The query returns the added amplitude correction data in <x>,<ampl>,{<x>,<ampl>} format.
Example
The following command adds two points to the current correction curve.
:SENSe:CORRection:CSET1:DATA 900E6,0.3,1.0E9,0.35
[:SENSe]:CORRection:CSET<n>:DELete
Syntax
[:SENSe]:CORRection:CSET<n>:DELete
Description
Deletes the specified amplitude correction setting.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4
--
Remarks
This command is only available for GPSA mode.
<n>: 1 indicates antenna; 2 indicates cable; 3 indicates other, and 4 indicates user.
Example
The following command deletes the antenna correction setting.
:SENSe:CORRection:CSET1:DELete