Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-123
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
ON|1
Remarks
This command is only available for RTSA mode.
Return Format
The query returns 0 or 1.
Example
The following command enables the auto setting mode of RBW.
:SENSe:BANDwidth:RESolution:SELect:AUTO:STATe ON
or :SENSe:BANDwidth:RESolution:SELect:AUTO:STATe 1
:SENSe:BWIDth:RESolution:SELect:AUTO:STATe ON or :SENSe:BWIDth:RESolution:SELect:AUTO:STATe 1
The following query returns 1.
:SENSe:BANDwidth:RESolution:SELect:AUTO:STATe?
:SENSe:BWIDth:RESolution:SELect:AUTO:STATe?
[:SENSe]:BANDwidth|BWIDth:SHAPe
Syntax
[:SENSe]:BANDwidth|BWIDth:SHAPe GAUSsian|FLATtop|BHARris|RECTangular|HANNing|KAISer
[:SENSe]:BANDwidth|BWIDth:SHAPe?
Description
Sets the filter type.
Queries the filter type.
Parameter
Name
Type
Range
Default
——
Keyword
GAUSsian|FLATtop|BHARris|RECTangular|HANNing|KAISer
GAUSsian
Remarks
This command is only available for RTSA mode.
When "Rectangular" is set to be the filter type, the analyzer automatically selects RBW1, and "RBW2
through RBW6" is disabled.
Return Format
The query returns GAUS, FLAT, BHAR, RECT, HANN, or KAIS.
Example
The following command sets the filter type to Gaussian.
:SENSe:BANDwidth:SHAPe GAUSsian
:SENSe:BWIDth:SHAPe GAUSsian
The following query returns GAUS.
:SENSe:BANDwidth:SHAPe?
:SENSe:BWIDth:SHAPe GAUSsian