Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-122 RSA3000E Programming Guide
Return Format
The query returns 0 or 1.
Example
The following command enables the auto setting mode of RBW.
:SENSe:BANDwidth:RESolution:AUTO ON or :SENSe:BANDwidth:RESolution:AUTO 1
:SENSe:BWIDth:RESolution:AUTO ON or :SENSe:BWIDth:RESolution:AUTO 1
The following query returns 1.
:SENSe:BANDwidth:RESolution:AUTO?
:SENSe:BWIDth:RESolution:AUTO?
[:SENSe]:BANDwidth|BWIDth[:RESolution]:SELect
Syntax
[:SENSe]:BANDwidth|BWIDth[:RESolution]:SELect RBW1|RBW2|RBW3|RBW4|RBW5|RBW6
[:SENSe]:BANDwidth|BWIDth[:RESolution]:SELect?
Description
Sets the resolution bandwidth (RBW).
Queries the resolution bandwidth.
Parameter
Name
Type
Range
Default
——
Keyword
RBW1|RBW2|RBW3|RBW4|RBW5|RBW6
RBW2
Remarks
This command is only available for RTSA mode. For details, refer to
RSA3000E User Guide .
Return Format
The query returns RBW1, RBW2, RBW3, RBW4, RBW5, or RBW6.
Example
The following command selects RBW1.
:SENSe:BANDwidth:RESolution:SELect RBW1
:SENSe:BWIDth:RESolution:SELect RBW1
The following query returns RBW1.
:SENSe:BANDwidth:RESolution:SELect?
:SENSe:BWIDth:RESolution:SELect?
[:SENSe]:BANDwidth|BWIDth[:RESolution]:SELect:AUTO[:STATe]
Syntax
[:SENSe]:BANDwidth|BWIDth[:RESolution]:SELect:AUTO[:STATe] OFF|ON|0|1
[:SENSe]:BANDwidth|BWIDth[:RESolution]:SELect:AUTO[:STATe]?
Description
Enables or disables the auto setting mode of RBW.
Queries the status of the auto setting mode of RBW.