Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-117
Remarks
This command is only available for Normal, Density, Spectrogram, and Density Spectrogram in RTSA mode.
Return Format
The query returns 0 or 1.
Example
The following command enables the auto acquisition time for producing one single trace or one bitmap.
:SENSe:ACQuisition:TIME:AUTO ON or :SENSe:ACQuisition:TIME:AUTO 1
The following query returns 1.
:SENSe:ACQuisition:TIME:AUTO?
[:SENSe]:ACQuisition:TIME:PVTime
Syntax
[:SENSe]:ACQuisition:TIME:PVTime <time>
[:SENSe]:ACQuisition:TIME:PVTime?
Description
Sets the acquisition time for producing a trace. The unit is s.
Queries the acquisition time for producing a trace.
Parameter
Name
Type
Range
Default
<time>
Consecutive Real Number
0 s to 40 s
30 ms
Remarks
This command is only available for PvT, PvT Spectrum, and PvT Spectrogram in RTSA mode.
Return Format
The query returns the acquisition time in scientific notation.
Example
The following command sets the acquisition time to 0.5 s.
:SENSe:ACQuisition:TIME:PVTime 0.5
The following query returns 5.000000000e-01.
:SENSe:ACQuisition:TIME:PVTime?
[:SENSe]:ACQuisition:TIME:PVTime:AUTO
Syntax
[:SENSe]:ACQuisition:TIME:PVTime:AUTO OFF|ON|0|1
[:SENSe]:ACQuisition:TIME:PVTime:AUTO?
Description
Enables or disables the auto acquisition time for producing a trace.
Queries the status of the auto acquisition time for producing a trace.