Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-22 RSA3000E Programming Guide
:CALCulate:MARKer<n>:FUNCtion
Syntax
:CALCulate:MARKer<n>:FUNCtion NOISe|BPOWer|BDENsity|OFF
:CALCulate:MARKer<n>:FUNCtion?
Description
Selects the special measurement type for the specified marker.
Queries the special measurement type of the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
——
Keyword
NOISe|BPOWer|BDENsity|OFF
OFF
Remarks
NOISe: indicates the noise measurement.
BPOWer: indicates the bandwidth power.
BDENsity: indicates the bandwidth density.
OFF: disables the measurements.
Return Format
The query returns NOIS, BPOW, BDEN, or OFF.
Example
The following command sets the measurement type of Marker 1 to noise measurement.
:CALCulate:MARKer1:FUNCtion NOISe
The following query returns NOIS.
:CALCulate:MARKer1:FUNCtion?
:CALCulate:MARKer<n>:FUNCtion:BAND:LEFT
Syntax
:CALCulate:MARKer<n>:FUNCtion:BAND:LEFT <freq>
:CALCulate:MARKer<n>:FUNCtion:BAND:LEFT?
Description
Sets the left edge frequency or time of the signal involved in the calculation for the band function.
Queries the left edge frequency or time of the signal involved in the calculation for the band function.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
<freq> Consecutive Real Number 0 to band right
center frequency-bandwidth/2
capture time/2-bandwidth/2 (PvT)
sweep time/2-bandwidth/2 (zero span)
Remarks
This command is only valid when the corresponding bandwidth function is enabled.
This command is used to set the left edge time when the zero span is enabled in GPSA mode or when in the
PvT view in RTSA mode.
Return Format
The query returns the left edge frequency or time of the signal in scientific notation.