Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-16 RSA3000E Programming Guide
:CALCulate:MARKer:PEAK:TABLe:READout
:TRACe:MATH:PEAK:THReshold
Syntax
:CALCulate:MARKer:PEAK:TABLe:READout ALL|GTDLine|LTDLine
:CALCulate:MARKer:PEAK:TABLe:READout?
:TRACe:MATH:PEAK:THReshold NORMal|DLMore|DLLess
:TRACe:MATH:PEAK:THReshold?
Description
Sets the peak criteria that the displayed peak must meet.
Queries the peak criteria that the displayed peak must meet.
Parameter
Name
Type
Range
Default
—— Keyword
ALL|GTDLine|LTDLine
NORMal|DLMore|DLLess
ALL
Remarks
ALL|NORMal: lists all the peaks defined by the peak criteria, and displays data based on the current sorting
order in the peak table.
GTDLine|DLMore: lists the peaks that are greater than the defined display line and that meet the peak
criteria.
LTDLine|DLLess: lists the peaks that are smaller than the defined display line and that meet the peak
criteria.
Return Format
The query returns ALL (NORM), GTDL (DLM), or LTDL (DLL).
Example
The following command lists all the peaks that are greater than the defined display line and that meet the
peak criteria.
:CALCulate:MARKer:PEAK:TABLe:READout GTDLine
:TRACe:MATH:PEAK:THReshold DLMore
The following query returns GTDL.
:CALCulate:MARKer:PEAK:TABLe:READout?
The following query returns DLM.
:TRACe:MATH:PEAK:THReshold?
:CALCulate:MARKer:PEAK:TABLe[:STATe]
:TRACe:MATH:PEAK:TABLe:STATe
Syntax
:CALCulate:MARKer:PEAK:TABLe[:STATe] OFF|ON|0|1
:CALCulate:MARKer:PEAK:TABLe[:STATe]?
:TRACe:MATH:PEAK:TABLe:STATe OFF|ON|0|1
:TRACe:MATH:PEAK:TABLe:STATe?
Description
Enables or disables the peak table.
Queries the status of the peak table.