Instructions

Chapter 4 Command System for VSA Mode RIGOL
RSA3000E Programming Guide 4-51
Parameter
Name
Type
Range
Default
<interger>
Integer
0 to 16384
0
Remarks
This command is valide only when the burst search function is enabled.
Return Format
The query returns the burst search run-in in integer.
Example
The following command sets the burst search run-in to 50。
:SENSe:DDEMod:SYNC:BURSt:RUNIn 50
The following query returns 50.
:SENSe:DDEMod:SYNC:BURSt:RUNIn?
[:SENSe]:DDEMod:SYNC:BURSt:STATe
Syntax
[:SENSe]:DDEMod:SYNC:BURSt:STATe OFF|ON|0|1
[:SENSe]:DDEMod:SYNC:BURSt:STATe?
Description
Enables or disables the burst search.
Queries the setting status of the burst search.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Return Format
The query returns 0 or 1.
Example
The following command enables the burst search.
:SENSe:DDEMod:SYNC:BURSt:STATe ON or :SENSe:DDEMod:SYNC:BURSt:STATe 1
The following query returns 1.
:SENSe:DDEMod:SYNC:BURSt:STATe?
[:SENSe]:DDEMod:SYNC:SLENgth
Syntax
[:SENSe]:DDEMod:SYNC:SLENgth <time>
[:SENSe]:DDEMod:SYNC:SLENgth?
Description
Sets the burst search length.
Queries the burst search length.