Instructions

RIGOL Chapter 4 Command System for VSA Mode
4-8 RSA3000E Programming Guide
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one next peak search, and marks with Marker 2.
:CALCulate:DDEMod:MARKer2:MAXimum:NEXT
:CALCulate:DDEMod:MARKer<n>:MAXimum:PREVious
Syntax
:CALCulate:DDEMod:MARKer<n>:MAXimum:PREVious
Description
Searches for the peak whose amplitude on the trace is next higher than that of the current peak and marks
it with the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one next higher peak search, and marks with Marker 2.
:CALCulate:DDEMod:MARKer2:MAXimum:PREVious
:CALCulate:DDEMod:MARKer<n>:MAXimum:RIGHt
Syntax
:CALCulate:DDEMod:MARKer<n>:MAXimum:RIGHt
Description
Searches for the nearest peak which is located at the right side of the current peak and marks it with the
specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one right peak search, and marks with Marker 2.
:CALCulate:DDEMod:MARKer2:MAXimum:RIGHt