Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-95
:TRIGger[:SEQuence]:ATRigger:STATe
Syntax
:TRIGger[:SEQuence]:ATRigger:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:ATRigger:STATe?
Description
Enables or disables the auto trigger function.
Queries the setting status of auto trigger function.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Return Format
The query returns 1 or 0.
Example
The following command enables the auto trigger function.
:TRIGger:SEQuence:ATRigger:STATe ON or :TRIGger:SEQuence:ATRigger:STATe 1
The following query returns 1.
:TRIGger:SEQuence:ATRigger:STATe?
:TRIGger[:SEQuence]:EXTernal<n>:DELay
Syntax
:TRIGger[:SEQuence]:EXTernal<n>:DELay <time>
:TRIGger[:SEQuence]:EXTernal<n>:DELay?
Description
Sets the delay time for the external trigger.
Queries the delay time for the external trigger.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2
--
<time>
Consecutive Real Number
0 us to 500 ms
1 μs
Remarks
When the parameter n is set to 1, it indicates External Trigger 1; when set to 2, it indicates External Trigger
2.
This command is only valid when the external trigger delay function is enabled.
Return Format
The query returns the delay time for the external trigger in scientific notation. The unit is s.
Example
The following command sets the delay time for External Trigger 1 to 100 ms.
:TRIGger:SEQuence:EXTernal1:DELay 0.1
The following query returns 1.000000000e-01.
:TRIGger:SEQuence:EXTernal1:DELay?