Instructions

RIGOL Chapter 3 Command System for EMI Mode
3-88 RSA3000E Programming Guide
Example
The following command sets the max hold time of the meter to INFinite.
:SENSe:METer:PHOLd:TYPE INFinite
The following query returns INF.
:SENSe:METer:PHOLd:TYPE?
[:SENSe]:METer<n>:DETector
Syntax
[:SENSe]:METer<n>:DETector POSitive|QPEak|CAVerage|RAVerage|AVERage|NEGative
[:SENSe]:METer<n>:DETector?
Description
Sets the detector type of the specified meter.
Queries the detector type of the specified meter.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3
1
-- Keyword
POSitive|QPEak|CAVerage|R
AVerage|AVERage|NEGative
POSitive
Remarks
POSitive: indicates the positive peak.
QPEak: indicates the quasi-peak.
CAVerage: indicates the CISPR average.
RAVerage: indicates the RMS average.
AVERage: indicates the voltage average.
NEGative: indicates the negative peak.
Return Format
The query returns POS, QPE, CAV, RAV, AVER, or NEG.
Example
The following command sets the detector type of Meter 1 to POSitive.
:SENSe:METer1:DETector POSitive
The following query returns POS.
:SENSe:METer1:DETector?
[:SENSe]:POWer[:RF]:ATTenuation
Syntax
[:SENSe]:POWer[:RF]:ATTenuation <real>
[:SENSe]:POWer[:RF]:ATTenuation?
Description
Sets the attenuation of the meter attenuator.
Queries the attenuation of the meter attenuator.