Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-53
Parameter
Name
Type
Range
Default
<label>
Keyword
LLINE1|LLINE2|LLINE3|LLINE4|LLINE5|LLINE6
--
<file_name>
ASCII String
--
--
Remarks
This operation fails if the file with the specified filename does not exist.
Example
The following command loads the limit line file (upp1.csv) to Limit Line 1.
:MMEMory:LOAD:LIMit LLINE1,upp1.csv
:MMEMory:LOAD:SCAN
Syntax
:MMEMory:LOAD:SCAN <file_name>
Description
Loads the specified scan table file (.csv).
Parameter
Name
Type
Range
Default
<file_name>
ASCII String
--
--
Remarks
This operation fails if the file with the specified filename does not exist.
Example
The following command loads the scan table file (scan1.csv) to the instrument.
:MMEMory:LOAD:SCAN scan.csv
:MMEMory:LOAD:SLISt
Syntax
:MMEMory:LOAD:SLISt <file_name>
Description
Loads the specified signal table file (.csv).
Parameter
Name
Type
Range
Default
<file_name>
ASCII String
--
--
Remarks
This operation fails if the file with the specified filename does not exist.
Example
The following command loads the signal table file (slist1.csv) to the instrument.
:MMEMory:LOAD:SLISt slist.csv