Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-11
:CALCulate:FSCan:MARKer<n>:REFerence
Syntax
:CALCulate:FSCan:MARKer<n>:REFerence <integer>
:CALCulate:FSCan:MARKer<n>:REFerence?
Description
Sets the reference marker for the specified marker.
Queries the reference marker for the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
<integer> Integer 1 to 8
By default, the reference
marker is the marker next to it.
Remarks
Each marker can have another marker to be its reference marker.
It the current marker is a Delta marker, the measurement result of the marker will be determined by the
reference marker.
Any marker cannot have itself to be the reference marker.
Example
The following command sets the reference marker for the Marker 1 to 2.
:CALCulate:FSCan:MARKer1:REFerence 2
The following query returns 2.
:CALCulate:FSCan:MARKer1:REFerence?
:CALCulate:FSCan:MARKer<n>[:SET]:SLISt
Syntax
:CALCulate:FSCan:MARKer<n>[:SET]:SLISt
Description
Adds the frequency at the specified marker to the signal table.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
Example
The following command adds the frequency at the Marker 1 (Position) to the signal table.
:CALCulate:FSCan:MARKer1:SET:SLISt
:CALCulate:FSCan:MARKer<n>[:SET]:METer
Syntax
:CALCulate:FSCan:MARKer<n>[:SET]:METer
Description
Sets the frequency at the currently selected marker to the frequency of the meter.