Instructions

Chapter 1 Programming Overview RIGOL
RSA3000E Programming Guide 1-3
Remote Control Method
1. User-defined programming
You can refer to the SCPI (Standard Commands for Programmable Instruments) commands listed in
Chapter 2 in this manual to control RSA3000E by programming in LabVIEW, Visual C++, and other
development environments. For details, refer to descriptions in Chapter 4 in this manual.
2. Send SCPI commands via the PC software
You can use the PC software to send commands to control RSA3000E remotely. RIGOL Ultra Sigma is
recommended. You can download the software from RIGOL official website (www.rigol.com).